Ridgeform | Standing Seam Metal Roofing on Vancouver Island

Metal exteriors, made to last

What we do.

Standing seam roofing, metal siding, and the detail work that brings an exterior together. Planned in 3D. Built with care. Managed by the person doing the work.

Standing seam metal roofing

Hidden fasteners, a wide colour range, 3D visualization and modeling, construction documentation, and warranty.

Metal siding

Exterior metal cladding to match and complement a new roof, creating a cohesive exterior.

Roof maintenance

Inspections and upkeep for residential metal roofing across Victoria and Vancouver Island.

Project management

Steady progress, clear communication, and a finish date you can plan around.

Talk through your project

Why standing seam

A cleaner line.
A stronger roof.

Hidden-fastener panels lock together without exposed screws. Built for Vancouver Island conditions, with attention to the flashing, penetrations, and structural details that matter.

01

Screw-less hidden fasteners

Panels lock together without exposed screws. Fewer leak points, a cleaner architectural line.

02

Built for coastal weather

Planned for Vancouver Island’s rain, wind, and coastal exposure, with careful detailing at every transition.

03

Low maintenance, long life

A practical alternative to the patch & repair cycles of asphalt or torch-on roofing, while lasting twice as long.

04

Detail work that holds up

Skylights, chimneys, low slopes, and complex angles are planned in the model before anyone climbs the ladder.

Owner-led. Detail-driven.

Meet Aaron.

The person who quotes your roof is the person who installs it.

Aaron Boire started in roofing out of high school and moved from shingle contracting to metal specialization. He’s a metalworker who sells and installs the roofs he quotes.

That means direct owner access, accountable communication, and no bloated sales process between the first conversation and the final walkthrough.

Talk with Aaron

From first visit to final seam

A clear path to
a finished roof.

From the first measurements to the final walkthrough, every detail is planned before it is built.

Aaron Boire working on a standing seam metal roof — Aaron Boire / Owner & metalworker

Blue pinch seam metal roof on the Avebury home

Selected work

Built here.
Built to hold up.

These recent standing seam metal roof installs across Vancouver Island have complex geometry, considered details, and clean lines that follow the architecture.

Avebury

Sharp angles on a residential pinch seam roof. Complex geometry and transitions planned in 3D before panels were cut—no guesswork on site.

Glendenning

Nestled in heavy tree cover with European skylight and chimney details. Flashing and penetrations built for the places where debris and moisture collect.

Salsbury

Low-slope cricket detail, executed in standing seam metal with the right panel layout and slope transitions.

Frequently asked questions

Before you choose your roof.

Materials, details, process, and what to expect. If your question is specific to your home, let’s talk.

Properly installed standing seam metal roofing typically lasts 40–70 years depending on material and coastal exposure. Hidden fasteners reduce the surface wear and leak risk that shorten the life of exposed-fastener systems.

We specialize in metal exteriors—standing seam metal roofing and metal siding. Roof systems use hidden-fastener, screw-less standing seam panels (including profiles such as Aspen and pinch seam) with coatings suited to coastal exposure. We do not install asphalt shingles or torch-on roofing; when those come off, they are replaced with metal. Metal siding uses compatible panel profiles so the roof and exterior can read as one cohesive system.

A wide range of factory-applied colours and finishes is available on standing seam panels. During the quote stage, we review options against your home’s siding, trim, and surroundings—and use 3D visualization so you can see the roof colour before panels are ordered.

Yes. Panel profile, seam style, colour, and layout are all part of the conversation. We plan skylights, chimneys, low-slope crickets, valleys, and complex angles in the 3D model before install—not as afterthoughts on site. If you have a specific look in mind, bring reference photos to the site visit and we will walk through what works with your roof geometry and budget.

Exposed-fastener roofs screw through the panel face—each screw is a potential leak point and needs periodic tightening. Standing seam panels lock together along raised seams with fasteners hidden beneath. Cleaner look, fewer exposed failure points, less maintenance.

Yes. Low-slope crickets, pinch seams, skylights, chimneys, and multi-angle transitions are a core part of the work. Complex details are modeled and pre-cut before install—not improvised on the ladder.

Victoria, Saanich, Langford, Sidney, greater Vancouver Island, and the Gulf Islands.

A brief call to understand the project, a site visit, then a detailed estimate—usually within a few days of the visit. No pressure, no bloated sales process.

Yes. Standing seam installs include construction documentation and warranty backed by the installation.

Yes. We handle full tear-offs and replacements—moving from asphalt shingles or torch-on flat roofing to a screw-less standing seam system.

Metal roofing built for coastal weather.